-
Nickel-Plated Rotor gives increased magnetic strength, improved throttle feel
-
Improved motor acceleration and power
-
Sensor-based for excellent braking and low-speed driveability
-
Thermal Overload Protection (when used with a Novak brushless ESC)
-
Factory hand-wound and race-tuned
SS PRO BRUSHLESS MOTOR FEATURES
Sensor-based for excellent braking and low-speed driveability
High-performance Nickel-plated Sintered Neodymium rotor (ROAR-Approved!) for maximum motor acceleration, braking power, and performance in high-temperature conditions
Oversized front bearing for increased load handling and bearing life
Lightweight ribbed aluminum end bells
Provides approximately 20% longer run-times compared to brushed motors
Specifically designed for R/C vehicles
Non-removable color timing ring (SS10.5 and SS13.5 motors)
Direct-Solder Wiring Tabs for flexible soldering options
Minimal maintenance
User-replaceable rotor, front end bell/bearing, and rear bearing
Thermal Overload Protection (when used with a Novak brushless ESC)
No cogging
Factory hand-wound and race-tuned
Meets all ROAR specifications
SS PRO BRUSHLESS MOTOR SPECIFICATIONS
Turns: 8.5 (#3408), 10.5 (#3410), 13.5 (#3413)
Design: Sensor-based
Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
Input Voltage: 4-7 cells (1.2V/cell or 4.8-8.4 total volts) [input voltage of GTB is 4-6 cells]
Magnet: Nickel-plated, Sintered, high-strength Neodymium
Watts: 280 (#3408), 235 (#3410), 195 (#3413)
KV (unloaded): 5,000 (#3408), 4,200 (#3410), 3,300 (#3413) RPM/Volt
Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
Motor Weight: 6.61 oz. (187 grams)
Shaft Diameter: 0.125” (3.2 mm) [accepts all existing pinion gears]
Front Bearing Size: 1/2” x 3/16” (12.7x4.8mm)
Timing Ring: Black (#3408), Blue (#3410), Orange (#3413)
Protection: Thermal
Based on Novaks Velociti-Series Racing brushless motors, Novak is pleased to announce its new SS Pro-Series racing brushless motors. The SS Pro-Series is available in three motor winds:
SS8.5 Pro Brushless Motor is 8.5 turns, and similar to a 15-17-turn mild-modified brush motor (#3408)
SS10.5 Pro Brushless Motor is 10.5 turns, and similar to a 19-turn brush motor (#3410)
SS13.5 Pro Stock Brushless Motor is 13.5 turns, and similar to a 27-turn racing stock brush motor (#3413)
Type: Sensor-based, SS PRO BRUSHLESS
Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
Bearings or Bushings: Bearing
Wire Turns: 10.5 turns
Voltage: 4.8-8.4V
RPM/Volt (Kv): 4,200Kv Under No Load
Cells: 4-7 cells (1.2V/cell)
Weight: 6.61 oz. (187 grams)
Shaft Diameter: 0.125” (3.2 mm)
